Mapping Command Finder for Traktor 2.0.3, 2.1.x and 2.5.0

Move the mouse over a button, knob or slider to see the corresponding mapping commands.
More detailed information about these and all other mapping commands and hundreds of practical usage examples can be found in the Traktor 2 Bible.

FX Unit, Single Mode

FXGroupMode

FX Unit, Group Mode

FXGroup

Master Clock Panel

MasterClockPanel

Loop Recorder, Master Panel

Mix Recorder Panel

MixRecorderPanel

Deck

Deck, Timecode Commands

DeckTimecode

Cross Fader Panel

Fader, EQ, Mixer

MixerEQ

Advanced Deck Panel, Move

Advanced Deck Panel, Cue

Advanced Deck Panel, Grid

Sample Slot, Traktor 2.0.3

Sample Slot, Traktor 2.1.1

Remix Deck, Traktor 2.5

26 Comments

2ez wrote on April 1, 2011 at 11:08 Hi to all . just got the new pro 2 and can not get my s4 till 3 week,s . have been trying to find a midi mapping for pro 2 and vestax vci-100 . can any one help

johnythefox wrote on April 6, 2011 at 17:32 Hi to all does anyone have a tsi file for the hercules RMX working on the new Traktor 2 for Mac

PhilippeLeGrand wrote on April 8, 2011 at 15:49 @johnythefox You can use the .tsi file for version 1.2x, it works with Traktor 2. According to the Hercules support site they will release Traktor 2 configurations soon anyways. Here's the link: http://ts.hercules.com/eng/index.php?pg=view_files&gid=17&fid=62&pid=215&cid=5

hystericego wrote on April 11, 2011 at 15:28 Hi, I have downloaded a new tsi for using two X1's and traktor v2 for using the sample slots on the second X1, unfortunately its made a complete mess of everything, so has any one got any idea how i get the factory presets back on the X1's or a link? many thanks, Rob

Lorena wrote on May 9, 2011 at 11:09 Posts like this brighten up my day. Thanks for taking the time.

DJ Inoxxxia wrote on June 1, 2011 at 18:42 Thx a lot!!! ain't resolved all the problem I have to map my VMS4 but it helped me so much to make my own mapping, thx again!!!

Anonymous wrote on June 11, 2011 at 01:35 Cheers was stuck with the hotcue mappings but this helped me out bigtime!

eduardo santos wrote on August 26, 2011 at 18:14 mapeamento para a bcd 3000

Anonymous wrote on September 2, 2011 at 20:50 how do i map a shift button?

magicyoyo wrote on September 12, 2011 at 06:37 I just want to say thanks! It helped me a lot.

psyEDk wrote on September 19, 2011 at 02:33 Really handy little article, Burr one question - is there no way to toggle between matter clock display and effects display without using the mouse?

ferrari57 wrote on January 15, 2012 at 02:16 how do i map the LED's on ns6 in traktor pro2 scratch?? thank you

brian ketison wrote on January 23, 2012 at 22:14 how do i map my traktor kontrol s2 to shift then tempo reset to get it to blink for the effects to be used on jog wheels lke in video with ian golden help please

Uobwawug wrote on January 25, 2012 at 22:00 Good crew it's cool :)

Nightflowers wrote on March 20, 2012 at 15:49 Hi, Is there a mapping command to switch between FX Unit and Master Clock/Mix Recorder Panels ?
	Rainer G. Haselier (admin) says: No direct mapping command. Workaround: You can create different layouts (one with FX, one with Master Clock/Mix Recorder for example) and then switch between these layouts with a mapping command.

Rob Munoz wrote on April 20, 2012 at 06:41 Will there ever be a Teaktor pro 2 map for the Numark V7 ? I enjoy these decks & like Traktor more than Serato ... Thanks.

rodrigo augusto wrote on May 24, 2012 at 18:29 nesse traktor 2.5 vai tem tsi pro cdj denon 1200 s

priglmeier wrote on June 3, 2012 at 19:20 I had created a very nice mapping TSI file for Traktor 2.x with scratching functions and shared it previously. Since the upgrade to the latest version, when I use the scratch (jog wheels) on my Hercules RMX Traktor stops playback and appears to de-select the track I was using? I have tried to re-load my older TSI and looked at the mappings to see if they have changed but I can't get Traktor to keep playing after scratching? Help please. ~thanks

Bastian wrote on June 29, 2012 at 12:34 Is there a way to map the track type in Traktor? In other words, could I change a Track deck into a Line In by pressing a button in TouchOSC or whatever

glen wrote on July 10, 2012 at 05:16 hi iv got the numark n4 and traktor pro but need the tis files for it to run and the update mapping for them can any body help please

Jehm wrote on July 23, 2012 at 15:57 after activating a loop what is the command which moves the loop. e.g looping a 4 grid loop. how do i move 4 grids back or forth while still being in loop?

Louis wrote on January 3, 2013 at 22:33 Good afternoon guys, I have the DJM T1. I need help with modifying the existing mapping. I want to turn off or even eliminate the sampler mode functions (C&D) and remap them for Cue/cue delete (Via Shift) 5-8 for deck A&B. I know the new pioneer firmware give a "Triple shit tap" option to access Cue 5-8, but I believe going my proposed way would make life a little bit easer. I have tried pioneer user forum but was not even worth a farthing. I hope someone would at least give me a hint. Best Regards and Happy New Year.

sharath wrote on January 20, 2013 at 07:19 Hi, Does any one has Kontrol s4 mapping for Virtual dj? And i am also looking for fx TSI in midi mode . Please advise. Thanks

DC wrote on August 1, 2013 at 11:12 Does anyone have the mapping TSI for the America Audio MRX 10 or 19

Fernando Brito wrote on August 1, 2013 at 17:52 I need help. I have a Hercules Air Control mixer. I´m Working with traktor Pro I liked to set up the beat led in mixer with traktor. Is it possible? What note / mapping for the beat Led in hercules air control? Thank you.

djrichtee wrote on March 11, 2014 at 21:43 Hi You Guys At Traktor Bible Posted Mapping Commands Rename And Move Orgy = De-Confuser For Traktor 2.1.3 To Traktor 2.5.0 Is There A De-Confuser For Traktor 2.5.0 To Traktor 2.5.1 Up To 2.6.8 Or Any From 2.5.0 Upwards ? Fingers Crossed Cheers

  Name

  E-Mail (will not be published)

  Website

Cancel