Pro S4: User Mapping to reset FX/Deck assignment in 4 FX mode

If you use another controller next to the S4 it can be useful still to be able to assign FX unit 1 and FX unit 2 to all four decks. To achieve this I created a small user mapping for the S4. It overwrites the restrictive default assignment in 4 FX units mode and re-enables the four disabled assignment buttons.
Preview
Traktor Pro S4 uses in the default configuration two of the four available FX units. In this setting the eight deck/FX assignment buttons on the S4 controller can be used to assign FX unit 1 and FX unit 2 to each of the four decks.

Things change a bit when you enable all four FX units on the Preferences/Effects dialog box. Then four of the assignment buttons are disabled. The other four can be used to enable/disable the pre-defined assignment between FX unit and deck. Each deck then has its dedicated FX unit: deck A uses FX unit 1, deck B uses FX unit 2 and so on.
Native Instruments - Kontrol S4
Pro S4 - Version 1.0.x (Pro S4)Downloads: 4370
4 decks, 2 FX units
Author: Rainer G. HaselierDate: 10-30-2010

Download

 

Rating

Current rating: 3 (1 votes)

Rating

You must be logged-in to rate a mapping.

4 Comments

Rainer G. Haselier wrote on October 30, 2010 at 11:41
TSI is uploaded now!
 
weltraumpapst wrote on November 4, 2010 at 18:01
thanks a lot for that.. one thing: the leds dont really work. on deck C/D they dont work at all, on A only 1 on B only 2. i guess it has to do something with the default s4 mapping. is there a way to get the LED to lit up correctly? thx
 Rainer G. Haselier (admin) says:
The LED output can't get overwritten. I tried to map this but either the hardware driver or the software prevents the LED to lit up.
 
isuru.kuruppu wrote on June 9, 2011 at 06:48
ANy updates on the LED output issue ? just assuming after 6 months there might've been a few changes. If not major drawback on NI's part for not looking into such a basic matter and allowing such configurations. Thanks for the mapping. Cheers
 
boman wrote on January 9, 2012 at 17:12
would it be possible to map the 3. and 4. effect to be activated by one of the shift buttons +the assignment (1,2) buttons? the other shift+assignment couls still be used to assign the deck to the crossfader.
 

 

Add comment

You need to be logged in to post a comment.


Impressum | Press Area | Copyright © 2008-2016 Haselier IT Services. All Rights Reserved.