Xone:4D | Traktor Pro 2.x.x Midi Mapping

2 Trackdecks + 2 Sample Decks

*** UPDATED 2011-04-25 ***
*** UPDATED to v1.0.2b ***

Midimap 1/Channel 2

Left Control Unit = Deck A/Sample Deck C
Right Control Unit = Deck B/Sample Deck D

Full control to 2 Trackdecks and 2 Sample Decks at once. Loop, move, set Cuepoints, grid your tracks on demand without setting Deck Focus.

SHIFT (blue) = Mod#2
SHIFT (red) = Mod#3

To Do:
waiting for your feedback ;)

- Sample Deck C Slot 3 now works properly when Slot Play/Pause is triggered

- added Cuepoints (Set/Delete + Select)
- added Cup (Cue Play)
- added Beatgridding
- added Advanced Panels for Move/Cue/Grid depending on activity
- both SHIFT buttons allow you to Seek Position at one deck (lower sensivity for Cuepoints & Beatgridding) i.e. Deck A - SHIFT (blue) + Jogwheel = 10% sensivity, SHIFT (red) + Jogwheel = 7% sensivity; Deck B - SHIFT (red) + Jogwheel = 10% sensivity, SHIFT (blue) + Jogwheel = 7% sensivity

- added FX Panel Mode (single (black) <-> chained (grey))
- added Snap/Quantize
- added Lightpipes to Deck A & B (Deck A/B Play/Pause, Deck A/B FX1/2 On/Off)
- added AudioRec Gain
- added autoswitching layout when Master Tempo/AudioRec Gain or Select FX1/2 is triggered
- added Favorite Select
- changed FX Fader to Soft Takeover
Allen & Heath - Xone:4D
Pro - Version 2.0.0 - 2.0.3Downloads: 4885
4 decks, 2 FX units
Author: BrennwertDate: 4-26-2011

Download  Controller



Current rating: 4 (1 votes)


You must be logged-in to rate a mapping.


DaveRR wrote on May 13, 2011 at 19:57
A huge amount of work very well done, thank you from one very grateful DJ. The only thing i miss is a simple tempo bend to adjust phase of two running tracks. Its basic stuff i realise but its vital to maintain perfect mixes without relying on Reaktor be
 Brennwert replies
pleased to hear that, thanks. atm i'm working on a .tsi for the xone:4d (trackdeck a & b) with one xone:1d (sampledeck d or trackdeck d), so it could take a little. i'll try to integrate the tempo bend function into this mapping this week.
markstent wrote on May 23, 2011 at 10:08
i have imported the mapping...but when i push any of the buttons on the 4d nothing happens...am i doing something wrong? i just got the 4d
Brennwert wrote on May 24, 2011 at 11:38
actually it should run after the import. other .tsi files are working with your 4d?
Dimitri wrote on December 7, 2011 at 19:50
Hi same problem here when i import the tsi file none of the controls on the xone work. Could you please help me out here.
Cid K wrote on January 26, 2012 at 02:14
I loaded up the Mapper and nothing works... I currently only have this mapper inside Traktor and The In/Out Ports are set for Xone 4D...
ogletree75 wrote on December 30, 2012 at 18:22
Hi does this work with 2.6 scratch pro?


Add comment

You need to be logged in to post a comment.

Impressum | Press Area | Copyright © 2008-2016 Haselier IT Services. All Rights Reserved.