This mapping is a complete revamp of the original one. The buttons mapping matches (90%) their real functions in CD or USB mode. It means you will not get lost when switching from one mode to another.
As always, backup your TSI file before importing any other one.
++
EDIT: file reuploaded due to a version error (damn Traktor export bug) |
Transport and Play Section:
A1 and A2 -> set and call hotcues 1 and 2
B -> sets loop out for for manual loop. Press B a second time: exits the loop
FLIP (CLR) + A1 or A2 -> Delete Hotcue1 or Hotcue2
Exit/Reloop -> Set a loop from current position with current selected loop size. Press a second time: exits the loop
Next Track/AB Trim + Parameters Knob : change the loop size
Next Track/AB Trim + Pitch bend buttons: change the loop size
TAP -> Sync the deck
Time-Cont./Single -> sets current deck as Master
Title ID3/Util: not used yet
CUE and Play buttons: self explicit
Pitch Bend buttons and Pitch Fader: self explicit
PitchKey: enable/disable Keylock. In Traktor Pro 1, you have to disable and reenable the Keylock so that the LED reflects the current keylock state
Scratch ON/OFF: self explicit
FX Section (best used in chained mode)
Echo/Loop -> sets Effect 1 on in HOLD mode, the jog wheel will set the Effect 1 Parameter
Flanger -> sets Effect 2 on in HOLD mode, the jog wheel will set the Effect 2 Parameter
Filter -> sets Effect 3 on in HOLD mode, the jog wheel will set the Effect 3 Parameter
Any of the three effects button + Parameter Knob press: will reset the selected effect DRY/Wet value to the best on (Echo->50%, Flanger->50%, Filter->100%)
Any of the three effects button + Parameter Knob Rotary: sets the DRY/Wet value
FX Parameters Section
Brake -> Allows the Effect 1 silent setting in toggle mode: the jog wheel will set the Effect 1 Parameter whithout switching the effect on.
Dump -> Allows the Effect 2 silent setting in toggle mode: the jog wheel will set the Effect 2 Parameter whiteout switching the effect on.
Reverse -> Allows the Effect 3 silent setting in toggle mode: the jog wheel will set the Effect 3 Parameter whiteout switching the effect on.
While any of three modes is engaged, pressing on the Parameter Knob will reset the DRY/Wet value of the selected effect. Turning the Parameter Knob will sets the DRY/Wet for the FX Unit chain
Press the Back button will quit the FX silent setting mode and the jog will act as normal (pitch bend or scratch/track seeking)
File section
Disc Eject: unload the deck if it is not playing a track
Memo: not used
Back: exits silent FX parameter mode
Quick jump buttons: seek in the current track (rewind/forward)
Parameter Knob: browse through the file list
Parameter Knob press: loads the selected track into the deck
Please report any bug or suggestion ;)
Enjoy! |
| Denon - DN-S1200 |
| Pro - Version 1.2.6/1.2.7 | Downloads: 7167 |
| 2 decks, 2 FX units |
| Author: chachakoala | Date: 5-22-2011 |
Download Controller |
|
| |
Rating
Current rating: 4 (1 votes)
You must be logged-in to rate a mapping.
1 comment