VCI-400 Mapping by LittleFranky (Updated Version 1.6) Traktor 2.5 working!

Newest version of my mapping currently here :
http://www.traktorbible.com/freaks/mappingview.aspx?id=538

WALKTHROUGH VIDEO
http://youtu.be/LIuGsjcMGPI
Preview
GENERALS IN 1.0:

-NORMAL DECK CONTROL on deck A&B
-RECORD FUNCTIONALITY in the section below master levels
-KILL FUNCTION on high-mid-low as well as filter below CUE DECKS
-BROWSE through tracks and folders by holding down the shift button and moving jogwheel or the browse encoder
-mapped the main headphone button to FULLSCREEN MODE
-ECHO SUPPORT ->press leftern encoder to activate the freeze mode then you can adjust the lenght by moving  
-embedded LED SUPPORT
-added beatjumps "MODE 1"(8 counts) on rubber buttons (glowing red on the edge of the controller)
-added sample deck support on "MODE 2"

FULL 4-FX SUPPORT
switch to Decks C&D to enter the EFFECT SECTION:

-the GROUP SECTION is being controlled by the belonging jogwheel
-to select one of the FOUR PREMAPPED EFFECT COMBINATIONS choose from one of the (glowing) "cue" buttons on each side
-activate the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down)
-the SINGLE SECTION is being controlled by the "cue" buttons below the ones of the group section


UPDATE TO VERSION 1.1!
GENERALS:

improved LED SUPPORT
-now "play", and both "back & forth" buttons indicate BEAT PHASE MONITOR
-TRACK-END WARNING embedded (buttons between cue and "forth" now light up if a track is going to end)
-RECORD BUTTON in the upper left (the one above the pitch fader)
-the one above the record button still affects the "LOOP ACTIVATION MODE" on each deck

FX MODE CHANGES:
-recalibrated the ACCELERATION value on the upper group effects (you will now have a longer range of the basic 4 presets
-embedded BEATSLICER BUTTONS to cue points 5-8
-REMOVED THE VINYL "FX-PANEL MODE BUTTON"(effects will now themselfes change to the right fx-panel mode)
NOTE HERE: the first push will SET the fx-panel, the second will ACTIVATE the effect
-REMOVED THE PITCH BEND FX CAPABILITY and changed it to the NORMAL TEMPO BEND (instead you now have access to the deck "c-&d volume faders" to ADJUST FX)
-embedded the LOOP CONTROL ENCODER to "fx mode"
-added new features to the small buttons below the cue's to control TTFX (leftern buttons here load presets, rightern ones activate the "fx buttons 1 & 2"


UPDATE TO VERSION 1.2!
GENERALS:
-e.g. some LED ADJUSTMENTS
-some PROBLEMS WITH HOTCUE BUTTONS
VCI-400 now fully supports SAMPLE DECKS:
-mid "mode" of the 6 buttons at the bottom now SWITCHES VISUAL DECK CONTROL to sample decks c&d
-deck c & d "gain,hi-,mid-" and "low" knobs now ADJUST THE VOLUME of the belonging SAMPLE DECKS


UPDATE TO VERSION 1.3!
GENERALS:
-UPDATED 3 PARAMETERS of GROUP-JOG-FX & DRY/WET:
->now parameters switch back to 0-STATE if tension to the wheel is released
-introducing the new way to LOAD SAMPLES
->toggle deck C&D HEADPHONE BUTTON (LED will light up) it will light up as you're now in LOAD MODE
-press one of the sample deck buttons to load a sample

for the changelogs fom 1.4 - 1.6 pls visit
http://www.traktorbible.com/freaks/mappingview.aspx?id=472
or just open the given txt file you find in the zip

Vestax - VCI-400
Pro - Version 2.1.xDownloads: 3035
2 decks, 4 FX units
Author: LittleFrankyDate: 3-12-2013

Download

 

Rating

Current rating: 2 (2 votes)

Rating

You must be logged-in to rate a mapping.

6 Comments

TomUnfiltered wrote on June 2, 2012 at 04:05
when i activate the fx-presets the screen changes to broser mode....how can i change it to stay in extended-mode?
 
TomUnfiltered wrote on June 2, 2012 at 04:08
found it.....i deleted the browser mode at layout-manager and reconfigured it
 
TomUnfiltered wrote on June 2, 2012 at 04:11
bye the way.....the best tsi i found....thank you 4 your effort
 
LittleFranky wrote on June 3, 2012 at 12:32
thank you TomUnifiltered for your support :) I am going to release an updated version of the mapping for traktor 2.5 users in the next weeks. If there is any common issue 2.5 users already encountered - post it here to make it easier for me to fix the bu
 
LittleFranky wrote on June 26, 2012 at 09:20
UPDATE TO VERSION 1.5! (Traktor 2.5 Support) GENERALS -improved LED MAPPING -bugfixes -wave form-zoom on sync & load button (deck c - a deck d - b)
 
LittleFranky wrote on June 28, 2012 at 18:39
UPDATE TO VERSION 1.6! Check the text file you find in the zip for the latest changes :)
 

 

Add comment

You need to be logged in to post a comment.


Impressum | Press Area | Copyright © 2008-2016 Haselier IT Services. All Rights Reserved.