Maschine 2.6 - Ultimate Mk1 and Mk2 full control mapping!

outdated - get my 2.6.1 version of this mapping!
Preview
Finally!  The Ultimate Maschine mapping is back for Traktor 2.6!

This mapping gives you full control of Traktor, minus the remix decks.  Use maschine as a primary controller, or in addition to any other controller.

Works with Mk1 and Mk2!!!  One tsi file works for both generations.  Just install the correct .ncm or .ncm2 file in NI controller editor!

Print a template!  Maschine displays pad page controls on the right LCD.  Print + cut + tape the main control template to your controller!

17 - page manual!  included in download.

Video instructions here:

http://www.youtube.com/watch?v=rZZ0TjMOgyw&feature=youtu.be

The download includes the following files:
Maschine2.6.tsi

Maschine2.6.ncm
Mk2Maschine2.6.ncm2

Maschine2.6.pdf

Maschinetemplate.jpg
mk2maschinetemplate.jpg


Update 2/15:  Corrected knobs not working on Mk2 Maschine
Native Instruments - Maschine
Scratch Pro - Version 2.6Downloads: 4193
4 decks, 4 FX units
Author: Paulz1265Date: 4-14-2013

Download  Controller

 

Rating

Current rating: 5 (2 votes)

Rating

You must be logged-in to rate a mapping.

7 Comments

jord1242 wrote on February 14, 2013 at 15:09
Been dying to get my hands on the new version of this! Great mapping!! Thank you so much!
 
jord1242 wrote on February 20, 2013 at 16:59
Kudos btw on the BEST mapping I have ever used, by far!!! This is perfect for my DJ flow, and integrates easily with the S4 and F1!! One question, is there a way to get control back for effects 3-4? Your old mapping had a page for it, but this one didn't
 Paulz1265 replies
Thanks for the compliments! I did not map basic controls for FX 3 and 4 to reduce the number of pad pages. Unit 3 is used for beatslicer/gater, and 4 is for beatmash/echo. These units are set up so they don't need knobs.
 
mikecouk wrote on February 27, 2013 at 22:22
Paul, some gratify effects seems to be selecting the wrong effect in 2.6.1, most noticably the GATER on gratify 2, it's selecting the flange effect instead ! could this be because of the additions of macro effects to 2.6 changing the ordering or numbering
 Paulz1265 replies
You're right. Effects and knobs on Mk1 malfunction with 2.6.1. I made a newer version of this mapping, and will upload it as soon as I write the manual and make the video. It should be up by this weekend.
 
mikecouk wrote on March 1, 2013 at 11:20
great thanks, if you can an a comment here when it's up I'll check back over the next few days, was hoping to use it at a gig tonight but never mind :)
 Paulz1265 replies
I have the Mk1 version and template done for 2.6.1. Still working on Mk2 and the video. I you must have it right now, e-mail me. Paulz1265@yahoo.com
 
Paulz1265 wrote on March 4, 2013 at 07:51
If you upgraded to Traktor 2.6.1, get the newest version of this mapping here: http://www.traktorbible.com/freaks/mappingview.aspx?id=587
 
deejayollie@gmail.com wrote on March 28, 2013 at 09:22
I don't understand, you have this mapping for 4 decks but not for controlling any of the Remix decks?
 Paulz1265 replies
The remix decks can not be fully mapped with MIDI. You need a Traktor Kontrol F1 if you want to use the remix decks.
 
drunkunkle wrote on April 14, 2013 at 00:27
im trying to map this with the MK2 and it wont let me change the in and out ports in TSP2.6 what am i doing wrong?
 Paulz1265 replies
You may be doing everything right... A few other people had this issue as well. Get the newest version 2.6.1 here: http://www.traktorbible.com/freaks/mappingview.aspx?id=587
 

 

Add comment

You need to be logged in to post a comment.


Impressum | Press Area | Copyright © 2008-2016 Haselier IT Services. All Rights Reserved.