Pioneer DDJ-SB2, Midi Map for N.I. Traktor

Pioneer DDJ-SB2 for Traktor Pro
(version used for this map 2.6.8.)
Tested until Traktor Pro V 2.10
It works with no issues.

     4 Decks.
     Vinyl, (Scratch, bend) & Slip.
     Browser & Layout control.
     Tempo Fader & Tempo Range .
     Play, Backwards Playback, Cue
     Channel Fader Start/Cue.
     Gain, EQ & Monitor Cue .
     Levels, Channel Pre fader
     Sync Phase or Tempo & Phase.
     Filter knob, filter on/off, filter fader.
     8 Hot Cue.
     Loops: Auto Loop, "ROLL", Manual Loop, (size with Jog W.) & Cue Loops.
     4 Fx control, single or Group & Mixer Fx control.
     Deck Focus control.
     Master Clock, Auto, On/Off, Set master, tap master tempo, set as Master tempo.
     Waveform zoom, single, all decks & reset.
     Key lock, key adjust, preserve key, reset key.
     Snap & Quant.
     Sampler, 16 Cells Full control
     Beat Jump.
     Loop Recorder.

* For more than the obvious operations check on the guide:

Guide for this midi map:

All questions answered in the guide will be ignored.

NOTE 4 Mac users:
Some trouble has been reported when using the map with Mackintosh, it seems that the
"Pioneer DDJ-SB2 Fix" map is not working as intended so its not enabling the secondary layers of the SB2 in Traktor.
If some 1 has already deal with this issue please, u are most welcome to tell us something... thx in advance ;)


Sorry that i posted it as the SB (1), i was not able to find the SB2 in the list.
Pioneer - DDJ-SB
Pro - Version 2.6.xDownloads: 90332
4 decks, 4 FX units
Author: earblockDate: 4-14-2018




Current rating: 4,8 (10 votes)


You must be logged-in to rate a mapping.


DjPiwy wrote on August 21, 2016 at 20:53
Hi! The effects are mapped?
DjPiwy wrote on August 21, 2016 at 20:54
Oh, yes... FX ;)
 earblock replies
hi friend, check on the instructions :) and have a nice day :)
tobicapo wrote on October 30, 2016 at 21:29
Hi, everything ok but when i have a loop activated in deck A and i move the hi freq eq, this move the size of the loop, please how can i fix it?
 earblock replies
what u are reporting is an impossibility friend, make sure that this map is the only active map in your mapping settings inside traktor
adrianforce wrote on November 1, 2016 at 02:36
Hi, I cant import the mapping on my traktor software. Every time I try it tells me that the TSI configuration is not supported by this version of traktor. I have traktor scratch pro 2 on Windows 8.1. Any help would be very much appreciated. Thank yo
 earblock replies
hi friend.... usually when this happens in software, is because the version u are using is older than the version used to program the midi map... i would suggest u to update your traktor software, i guess that the map will work fine in the last version of
Budweisser wrote on November 2, 2016 at 02:14
Hey! Thank you so much for the awesome mapping! For someone who is new to the whole DJ scene it made my life a lot easier. I just have one question, when I use the FX for Deck A and press SHIFT+Button 1 (which is supposed to reset it) it for some reason a
 earblock replies
what version of traktor are u using? best regards
Budweisser wrote on November 2, 2016 at 02:16
for some reason activated the 3rd fx button in FX1. I have no idea why it does this. Do you think it could be something I'd inadvertently done or possibly an error of some sort?
 earblock replies
the only thing that comes to mind is that u may have any other map active in the settings...
djingsami wrote on December 21, 2016 at 13:20
Hello :) tnx for your mapping for Traktor. Everything works! you are the best (y)
 earblock replies
wow that's a good ass feedback, you owe me a beer! haha best regards for 2017...
phil366 wrote on December 28, 2016 at 06:20
Hello, this is really good stuff :-) Only problem I have is that the filter below the low, mid, and high is not working. How to get that to work?
 earblock replies
thx for the feedback, what exactly do u mean, what are the symptoms?... the filters will only affect the audio if they are turned on, u can turn them on with the mouse, or with the controller, for operations not labeled in the controller check the guide:
heybiff wrote on December 30, 2016 at 00:49
You seriously killed it on this mapping! GREAT JOB!
 earblock replies
thx heybiff...
rodolfohw wrote on February 15, 2017 at 04:32
Hey man ! Definitely an awesome mapping. You managed to map the loop, wich was missing in my previously used mapping. However, my sync button is not working. Any idea why ?
rodolfohw wrote on February 15, 2017 at 04:37
Sorry, I already fixed my sync. But I have one last doubt: can I loop more than 8x, like 16x or 32x ? I think the mapping only allows me to loop up to 8x. Thankss
djbossjb wrote on March 19, 2017 at 04:22
Hi! I just downloaded the map and I have one issue. I can't have any output from the headphone...the cue button works and even if I move the volume from Traktor for the headphone I have no sound coming out...any idea what I am doing wrong? thanks!
djbossjb wrote on March 19, 2017 at 20:15
I solved the problem thanks to your help! You are the man! Big credit for your work! I hope everyone donate something cause you deserve it!
chakal77 wrote on April 26, 2017 at 15:35
Awesome mapping man! Hard work, great work! How can i donate and get a document with all features descriptions?
butterfingers wrote on August 17, 2017 at 14:32
hi Earblock's. Just to tell you that your Mapping is the best map out there. and everything works jus the way you intended. most gratefull. have been usong in without issues ,,, I'd humbly like to ask you. if It would be possible to revisit it and m
butterfingers wrote on August 17, 2017 at 14:40
map the flux mode buttons "roll" as to not to turn off until the last button is off kind of like piano playing. , I,ve notice that when you press 1/4 to 1/2 to 1,beat and so on. the effect turn itself off , could you map them as to switch between param
 earblock replies
ye friend, was a limitation i encounter that i was not able to get around, i may be wrong but i think there was not way around... its exposed it in the GUIDE, in the section "- AUTO LOOP [ROLL]:", i over compensated this flaw with the possibility to chang
Djsatz wrote on October 5, 2017 at 12:38
hi, i have installed the mapping and working fine. except my channel A volume fader. where i have raised the fader to the level high, but in software the fader is not fitting properly. its drooping low and high in the software. can you suggest any solutio
 earblock replies
well.... this have nothing to do with the map... anyways, sorry to say but your machine seems to be failing, i experienced this kind of behavior in the past with midi devices, some times was fatal, some times was easy to fix, Check your Guaranty, it may s
ericos96 wrote on October 9, 2017 at 17:47
Hey thanks so much for uploading the mapping! I'm having the same problem as djbossjb - nothing is coming out of the headphones. Was there a quick fix for this?
 earblock replies
man sorry to say but the map must work perfect, check your outputs and your headphones...,..,...
ericos96 wrote on October 11, 2017 at 21:07
Hmm I'm just wondering because he said he had the same problem and fixed it with your help, headphones and outputs work fine with Serato Intro
 earblock replies
sorry long time to answer, most probably you came across the solution already by your self, if in any case u did not... i do not know what could be the problem, could be that traktor installation got corrupted, what i would do is to uninstall it, then to
j-braap wrote on January 9, 2018 at 04:23
Hi i am running traktor2 version 2.11.2 and everything works but decks 3 and 4. the levels and eq's work but to start or stop on track and platter don't work. any hint's or help with getting to work ??
baily99 wrote on February 20, 2018 at 23:25
Hi, any reason I can't hear my earphones using the smaller port? The rest of the program works great. Any help would be greatly appreciated....and I'll be donating.
dmarcelob wrote on March 14, 2018 at 10:13
Hi there, can someone create the mapping for the ddj sb3, can't find it anywhere
TaMadj wrote on March 29, 2018 at 13:25 enyone knows if this mapping working on mac.?thanks
Dindonneau wrote on April 28, 2018 at 19:57
Hello. I have a problem with my ddj-sb2. the button « master level » does not work. what to do ?
PPelektron wrote on November 20, 2018 at 14:48
Hey! Thanks a ton for the awesome mapping! I wanted to ask, did you map to cut the low frequencies with the push of a button or it is manually done using the low EQ? Thanks a ton in advance.
DubplateProfessor wrote on December 7, 2018 at 19:25
FYI, Tested on Traktor Pro v3.0.1.14 and was working flawlessly. I had to delete the mapping and re-import it to get it to work but so far so good.
galbeh wrote on August 17, 2019 at 18:29
Thank u! Worked fine on Traktor Ps.: For those who had the problem of lowering the volume of mid A by lowering the volume fader of deck A (besides that, when I had to turn on cue monitor A, track A would come back from the beginning and be l
galbeh wrote on August 17, 2019 at 18:30
For those who had the problem of lowering the volume of mid A by lowering the volume fader of deck A (besides that, when I had to turn on cue monitor A, track A would come back from the beginning and be looped) .Here I solved this by removing other mappin
galbeh wrote on August 17, 2019 at 18:35
A tip: You want the mapping to work 100%, remove any other mapping you have installed on Traktor (even from other controllers), leaving only the keyboard one and then adding this one.


Add comment

You need to be logged in to post a comment.

Impressum | Press Area | Copyright © 2008-2016 Haselier IT Services. All Rights Reserved.